alt6713 help4 tm umts700 (bands 13 & 14) lte linear pam data sheet - rev 2.7 m45 package 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 1: block diagram features ? lte compliant ? 4th generation help tm technology ? high effciency (lte mpr = 0 db): ? 35 % @ p out = +27.5 dbm ? 18 % @ p out = +16 dbm ? 12 % @ p out = +6 dbm ? low quiescent current: 3 ma ? low leakage current in shutdown mode: <5 a ? internal voltage regulator ? integrated daisy chainable directional coupler with cpl in and cpl out port. ? optimized for a 50 ? system ? 1.8 v control logic ? rohs compliant package, 260 o c msl-3 applications ? band 13 & 14 lte wireless devices product description the alt6713 help4 tm pa is a 4th generation help tm product for lte devices operating in umts 700 mhz bands 13 and 14. this pa incorporates anadigics help4 tm technology to deliver exceptional effciency at low power levels and low quiescent current without the need for external voltage regulators or converters. the device is manufactured using advanced ingap- plus tm hbt technology offering state-of-the-art reliability, temperature stability, and ruggedness. three selectable bias modes that optimize effciency for different output power levels and a shutdown mode with low leakage current increase handset talk and standby time. a daisy chainable directional coupler is integrated in the module, thus eliminating the need of an external coupler. the self-contained 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, effciency, and linearity in a 50 ? system. 1 2 3 4 5 10 9 8 7 6 v bat t rf in v mode 2 v mode 1 v en cp l ou t gn d cp l in rf ou t v cc bias contro l voltage regulatio n cp l gnd at slug (pad ) al t6713 02/2012
2 figure 2: pinout (x-ray top view) table 1: pin description v bat t rf in v mode 2 v mode 1 v en 1 2 3 4 56 7 8 9 10 cp l ou t gn d cp l in rf ou t v cc 1 2 3 4 56 7 8 9 10 pin name description 1 v batt battery voltage 2 rf in rf input 3 v mode2 mode control voltage 2 4 v mode1 mode control voltage 1 5 v en pa enable voltage 6 cpl out coupler output 7 gnd ground 8 cpl in coupler input 9 rf out rf output 10 v cc supply voltage data sheet - rev 2.7 02/2012 alt6713
3 electrical characteristics table 2: absolute minimum and maximum ratings stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. notes: (1) lte waveform characteristics: 10 mhz qpsk, 12 rb. (2) p out derated 0.5 db for 3.2 v operation. parameter min max unit supply voltage (v cc ) 0 +5 v battery voltage (v batt ) 0 +6 v control voltages (v mode1 , v mode2 , v en ) 0 +3.5 v rf input power (p in ) - +10 dbm storage temperature (t stg ) -40 +150 c parameter min typ max unit comments operating frequency (f) 777 - 798 mhz supply voltage (v cc ) +3.2 +3.4 +4.35 v p out < +27.5 dbm enable voltage (v en ) +1.35 0 +1.8 - +3.1 +0.5 v pa "on" pa "shut down" mode control voltage (v mode1 ,v mode2 ) +1.35 0 +1.8 - +3.1 +0.5 v low bias mode high bias mode output power (umts) lte (1) (mpr=0), hpm lte (1) (mpr=0), mpm lte (1) (mpr=0), lpm 27 (2) 15.5 (2) - 27.5 16 6 - - - dbm ts 36.101 rel 8 for lte case temperature (t c ) -30 - +90 c data sheet - rev 2.7 02/2012 alt6713
4 table 4: electrical specifcations - lte operation (mpr = 0 db waveform, 10 mh z qpsk, 12 rb) (t c = +25 c, v cc = +3.4 v, v batt = +3.4 v, v en = +1.8 v, 50 ? system) notes: (1) aclr and effciency measured at 787 mhz. parameter min typ max unit comments p out 9 mode1 9 mode2 dl 14 31 17 11 34 20 14 db p p p 9 9 9 9 9 9 7( r 7( (7 - - - -40 dbc p p p 9 9 9 9 9 9 7 & - - - -41 -40 -37 -37 dbc p p p 9 9 9 9 9 9 7 & - - - -40 -40 -40 dbc p p p 9 9 9 9 9 9 3rhuh (iilflhf (1) 31 14 9 12 - - - p p p 9 9 9 9 9 9 4lhfh &uuh ft r ld 0rh - 3 p ur 9 && sl 9 9 0rh &ruro &uuh - p ur 9 mode sl 9 02( 9 (deoh &uuh - 0.1 0.2 p ur 9 en sl 77 &uuh - p ur 9 batt sl 9 02( 9 hdndh &uuh - 4 10 a 9 batt 9 9 && 9 9 en 9 9 02( 9 1rlh 3rhu - - - -131 - - - p 0 r 0 3 d 0 r 0 0 d 0 r 0 duprlf ir ir ir - - -47 - - dbc p out p &rsol )dfru - 20 - db luhfll - 19 - db dl &dl hulr r - - db 0 ur 0 3l ur r prh sulr 2s hho doo sulr rs - - -70 dbc p out p ed ord 9 2ried ord 9 ssolh rhu doo rshudl frllr rd plpdf uh l r shupdh huddlr ru idlouh - - 9 ssolh rhu ioo rshudl udh data sheet - rev 2.7 02/2012 alt6713
5 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to the v en , v mode1 and v mode2 voltages. bias modes the power amplifer may be placed in either low, medium or high bias modes by applying the table 5: bias control appropriate logic level (see operating ranges table) to the v mode pins. the bias control table below lists the recommended modes of operation for various applications. three operating modes are recommended to optimize current consumption. high bias/high power operating mode is for p out levels > 16 dbm. at ~16 dbm - 6 dbm, the pa could be switched to medium power mode. for p out levels < ~6 dbm, the pa could be switched to low power mode for extremely low current consumption. application p out levels bias mode v en v mode1 v mode2 v cc v b at t low power (low bias mode) < +6 dbm low +1.8 v +1.8 v +1.8 v 3.2 - 4.35 v > 3.2 v med power (medium bias mode) > 6 dbm < +16 dbm low +1.8 v +1.8 v 0 v 3.2 - 4.35 v > 3.2 v high power (high bias mode) > +16 dbm high +1.8 v 0 v 0 v 3.2 - 4.35 v > 3.2 v shutdown - shutdown 0 v 0 v 0 v 3.2 - 4.35 v > 3.2 v v en v cc note 1 rf in notes 1,2 off sequence referenced after 90 % of rise time referenced before 10 % of fall time on sequence on sequence star t t_ 0n = 0 t_ 0n +1 s t_ 0n +3 s off sequence start t_ 0 ff = 0 t_ 0f f+ 2 st _0 ff +3 s vcontrols venable/vmode(s ) rise/fall max 1 s defined at 10% to 90% of min/max voltag e figure 3: minimum recommended on/off timing sequence notes: (1) level may be changed after rf is on. (2) rf off defned as pin -30 dbm. (3) simultaneous switching of v mode and v en is not recommended data sheet - rev 2.7 02/2012 alt6713
6 figure 4: evaluation board schematic c3 2.2 f ceramic rf in 1 6 7 10 8 5 4 3 v batt v mode1 rf out rf in gnd v cc v en cpl out v cc c1 33 pf v batt v mode 1 v en cpl in 29 v mode2 (n/c) c6 2.2 f c2 0.1 f gnd at slug cpl in c4 68 pf cpl out rf out c5 0.01 f data sheet - rev 2.7 02/2012 alt6713
7 figure 5: m45 package outline - 10 pin 3 mm x 3 mm x 1 mm surface mount module figure 6: branding specifcation - m45 package package outline 6713r llllnn yy wwc c pin 1 identifier pa rt number date co de y y=y ear ; ww=w ork week co untr y co de (c c) l ot number data sheet - rev 2.7 02/2012 alt6713
8 pcb and stencil design guideline pcb and stencil design guideline figure 7: recommended pcb layout information data sheet - rev 2.7 02/2012 alt6713
9 component packaging figure 8: carrier tape pin 1 figure 9: reel data sheet - rev 2.7 02/2012 alt6713
10 ordering information order number temperature range package description component packaging alt6713rm45q7 -30 o c to +90 o c rohs compliant 10 pin 3 mm x 3 mm x 1 mm surface mount module tape and reel, 2500 pieces per reel ALT6713RM45P9 -30 o c to +90 o c rohs compliant 10 pin 3 mm x 3 mm x 1 mm surface mount module partial tape and reel warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. import ant notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. data sheet - rev 2.7 02/2012 alt6713
|
